HVAC Replacement Cost in Sioux Falls, SD (2026)
Updated October 2026 · Sioux Falls, SD · index 0.93
How much does a new HVAC system cost in Sioux Falls? For a 3-ton system with central AC + gas furnace, homeowners in Sioux Falls, SD pay about $9,800 on average, and most quotes land between $6,650 and $12,900 — $2,225 to $4,298 per ton. The price covers removing the old system, the new outdoor and indoor equipment, a new line set, electrical and condensate connections, the thermostat, the permit, start-up and commissioning.
The HVAC replacement price in Sioux Falls runs 7% below the U.S. average: construction labor in the Sioux Falls area runs 11% below the national mean, materials sit at the national level. The same job averages $10,500 nationally and about $9,500 at the South Dakota statewide index.
HVAC Replacement cost calculator for Sioux Falls
1.5 to 5 ton
Are you a HVAC contractor? Price jobs like this in 60 seconds
HVAC replacement price in Sioux Falls by system type
What a 3-ton system costs in Sioux Falls with each system type, installed:
| Option | Average · range |
|---|---|
| Central AC + gas furnacesplit AC, matched coil and an 80,000 BTU furnace$3,261 per ton | $9,800$6,650 – $12,900 |
| Heat pump + air handlerall-electric split heat pump, no furnace$3,025 per ton | $9,100$6,100 – $12,100 |
| Cold-climate heat pump + air handlervariable-speed heat pump rated for deep winter$3,456 per ton | $10,400$7,000 – $13,700 |
The least expensive option in Sioux Falls is heat pump + air handler, at about $9,100; cold-climate heat pump + air handler averages $10,400, 1.1 times as much.
Cost to replace an HVAC system in Sioux Falls by size
With central AC + gas furnace, priced for Sioux Falls, SD:
| Size | Average · range |
|---|---|
| A 2-ton system$4,247 per ton | $8,500$5,800 – $11,200 |
| A 3-ton system$3,261 per ton | $9,800$6,650 – $12,900 |
| A 4-ton system$2,769 per ton | $11,100$7,550 – $14,600 |
Some costs stay the same whatever the size — load calculation and equipment sizing, mechanical permit and inspection, old system removed, refrigerant recovered — so a bigger job costs less per unit: $2,769 per ton for a 4-ton system against $4,247 for a 2-ton system.
What an HVAC replacement in Sioux Falls includes
Line by line, the $9,800 average for a 3-ton system breaks down like this: 32% labor, 65% materials and equipment, and $280 in permit fees passed through at cost.
| Line | Low – high |
|---|---|
| Load calculation and equipment sizing | $70 – $210 |
| Mechanical permit and inspection | $150 – $400 |
| Old system removed, refrigerant recovered | $320 – $570 |
| Gas furnace (about 80,000 BTU) | $1,400 – $2,550 |
| Outdoor unit, set on a new pad | $2,100 – $3,950 |
| Matched indoor coil | $920 – $2,000 |
| New refrigerant line set (25 ft) | $350 – $570 |
| Disconnect, whip and thermostat wire | $190 – $320 |
| Condensate drain and safety switch | $110 – $250 |
| Gas connection and furnace venting | $300 – $550 |
| Plenums and transitions to the ducts | $250 – $570 |
| Programmable or smart thermostat | $210 – $390 |
| Evacuation and refrigerant charge | $110 – $210 |
| Start-up and commissioning | $110 – $250 |
| Warranty registration and walk-through | $50 – $120 |
Each line is the price book's U.S. rate for that step, scaled by 0.76 to the installed price published sources give for the whole job (see how these prices are built), times Sioux Falls's index of 0.93; permit fees are not scaled.
Get free quotes from Sioux Falls contractors
Describe your project once and JobFlex sends it to a local HVAC contractor who prices it for your home — free, no account needed.
What affects HVAC replacement prices in Sioux Falls
Labor and materials in Sioux Falls
Construction wages in the Sioux Falls metro run 13% below the U.S. mean (BLS, May 2025), and specialty-contractor pay in the city's county moves that up by 2%, to 11% below the national mean. Materials in the area's ZIP codes price right at the national average. Together they give Sioux Falls a construction cost index of 0.93.
Where Sioux Falls sits in South Dakota
Sioux Falls is the most expensive of the 3 South Dakota cities in our index, against a statewide index of 0.90. Rapid City is the least expensive at 0.90.
Against the rest of the country
Of the 306 U.S. cities in JobFlex's index, Sioux Falls ranks 231st from the most expensive. The job that averages $9,800 here averages $10,500 at the national rate.
Climate a system is sized for in South Dakota
Contractors size equipment for the local design temperatures. Across South Dakota's counties the median is about 91°F on a hot summer day and -9°F on a cold winter night (ENERGY STAR county table), and your county can differ. Winters that cold are where a cold-climate heat pump or a furnace earns its price.
Sales tax in South Dakota
South Dakota's base state sales tax is 4.2%, and cities and counties can add their own. South Dakota also taxes installation labor on real property, so ask whether a quote includes tax on the whole job. Prices on this page are before tax.
What a Sioux Falls contractor will ask before quoting
- Job type — new construction, replacement or upgrade — and the evidence for it
- Heating and cooling load for this house (not the old nameplate), tonnage, fuel and refrigerant
- Ducts, line set, circuit, gas line and flue: keep, fix or replace, each with its reason
- Water heater in scope, and whether it shared the old flue
- Panel main amps, free slots and the new equipment's MCA
- Permits, tests and incentives that apply in this state
HVAC replacement cost in other South Dakota cities
A 3-ton system with central AC + gas furnace averages $9,800 in Sioux Falls; $9,500 in Rapid City, $9,500 in Pierre.
| City | Average · range |
|---|---|
| Rapid City, SD3% less | $9,500$6,450 – $12,500 |
| Pierre, SD3% less | $9,500$6,450 – $12,500 |
HVAC replacement price in Sioux Falls: questions
How much does a new HVAC system cost in Sioux Falls, SD?
About $9,800 for a 3-ton system with central AC + gas furnace, and most Sioux Falls quotes fall between $6,650 and $12,900. That is 7% below the U.S. average, where the same job averages $10,500.
What is the HVAC price per ton in Sioux Falls?
$2,225 to $4,298 per ton, about $3,261 on average with central AC + gas furnace. Smaller jobs cost more per unit, because the fixed costs are spread over less.
How much is a 4-ton system in Sioux Falls?
$7,550 to $14,600, about $11,100 on average, with central AC + gas furnace — $2,769 per ton.
Do you need a permit for HVAC replacement in Sioux Falls?
Yes — installing HVAC or fuel-burning equipment needs a permit nearly everywhere, Sioux Falls included. The prices on this page carry $150–$400 for the permit and inspection.
Does the price include sales tax in South Dakota?
No. The prices here are before tax; South Dakota's base state rate is 4.2%, plus any local rate. South Dakota taxes installation labor too.
What size HVAC system does a house in Sioux Falls need?
It is worked out with a Manual J load calculation for the house — included in the prices above — not from square footage alone. Here it is run against design temperatures of about 91°F in summer and -9°F in winter (the South Dakota median).
Other home projects in Sioux Falls
HVAC replacement cost in South Dakota
How these prices are built
Every price on this page comes from JobFlex's contractor price book: what a homeowner pays a licensed contractor for each step of the job, as a U.S. national average per unit, with the contractor's overhead and profit included and sales tax left out. The HVAC replacement is priced step by step, then multiplied by Sioux Falls's construction cost index of 0.93.
Where the price book's steps for an option add up to more than 20% over the installed price a published source gives for the whole job, every step but a permit fee is scaled down to the middle of that range: central AC + gas furnace × 0.76 (HomeCostCalcs 2026: $7,000–$14,000); heat pump + air handler × 0.76, following central AC + gas furnace; cold-climate heat pump + air handler × 0.76, following central AC + gas furnace.
The index weighs local construction wages (BLS Occupational Employment and Wage Statistics, May 2025) at 60% and the area's material prices (Craftsman ZIP-area factors) at 40%. Published indices for Sioux Falls, each on its own base: RSMeans residential 0.93, HUD 0.99, Craftsman 1.02. Treat any city figure as about ±5%; a contractor's quote for your house is the number to plan with.
Contractors in Sioux Falls build quotes like these with JobFlex's HVAC estimator.
- HomeCostCalcs 2026: furnace + AC replacement $7,000-$14,000 standard, $10,000-$20,000 high efficiency
- Today's Homeowner 2025: complete HVAC system install $5,000-$12,500