HVAC Replacement Cost in Brooklyn, NY (2026)
Updated October 2026 · Brooklyn, NY · index 1.11
How much does a new HVAC system cost in Brooklyn? For a 3-ton system with central AC + gas furnace, homeowners in Brooklyn, NY pay about $11,600 on average, and most quotes land between $7,950 and $15,300 — $2,646 to $5,104 per ton. The price covers removing the old system, the new outdoor and indoor equipment, a new line set, electrical and condensate connections, the thermostat, the permit, start-up and commissioning.
The HVAC replacement price in Brooklyn runs 11% above the U.S. average: construction labor in the Brooklyn area runs 17% above the national mean, materials 3% above. The same job averages $10,500 nationally and about $11,500 at the New York statewide index.
HVAC Replacement cost calculator for Brooklyn
1.5 to 5 ton
Are you a HVAC contractor? Price jobs like this in 60 seconds
HVAC replacement price in Brooklyn by system type
What a 3-ton system costs in Brooklyn with each system type, installed:
| Option | Average · range |
|---|---|
| Central AC + gas furnacesplit AC, matched coil and an 80,000 BTU furnace$3,875 per ton | $11,600$7,950 – $15,300 |
| Heat pump + air handlerall-electric split heat pump, no furnace$3,593 per ton | $10,800$7,250 – $14,300 |
| Cold-climate heat pump + air handlervariable-speed heat pump rated for deep winter$4,107 per ton | $12,300$8,300 – $16,300 |
The least expensive option in Brooklyn is heat pump + air handler, at about $10,800; cold-climate heat pump + air handler averages $12,300, 1.1 times as much.
Cost to replace an HVAC system in Brooklyn by size
With central AC + gas furnace, priced for Brooklyn, NY:
| Size | Average · range |
|---|---|
| A 2-ton system$5,042 per ton | $10,100$6,900 – $13,300 |
| A 3-ton system$3,875 per ton | $11,600$7,950 – $15,300 |
| A 4-ton system$3,291 per ton | $13,200$9,000 – $17,300 |
Some costs stay the same whatever the size — load calculation and equipment sizing, mechanical permit and inspection, old system removed, refrigerant recovered — so a bigger job costs less per unit: $3,291 per ton for a 4-ton system against $5,042 for a 2-ton system.
What an HVAC replacement in Brooklyn includes
Line by line, the $11,600 average for a 3-ton system breaks down like this: 32% labor, 65% materials and equipment, and $270 in permit fees passed through at cost.
| Line | Low – high |
|---|---|
| Load calculation and equipment sizing | $80 – $250 |
| Mechanical permit and inspection | $150 – $400 |
| Old system removed, refrigerant recovered | $380 – $680 |
| Gas furnace (about 80,000 BTU) | $1,700 – $3,050 |
| Outdoor unit, set on a new pad | $2,550 – $4,750 |
| Matched indoor coil | $1,100 – $2,350 |
| New refrigerant line set (25 ft) | $420 – $680 |
| Disconnect, whip and thermostat wire | $230 – $380 |
| Condensate drain and safety switch | $130 – $300 |
| Gas connection and furnace venting | $350 – $660 |
| Plenums and transitions to the ducts | $300 – $680 |
| Programmable or smart thermostat | $250 – $460 |
| Evacuation and refrigerant charge | $130 – $250 |
| Start-up and commissioning | $130 – $300 |
| Warranty registration and walk-through | $60 – $150 |
Each line is the price book's U.S. rate for that step, scaled by 0.76 to the installed price published sources give for the whole job (see how these prices are built), times Brooklyn's index of 1.11; permit fees are not scaled.
Get free quotes from Brooklyn contractors
Describe your project once and JobFlex sends it to a local HVAC contractor who prices it for your home — free, no account needed.
What affects HVAC replacement prices in Brooklyn
Labor and materials in Brooklyn
Construction wages in the Brooklyn metro run 26% above the U.S. mean (BLS, May 2025), and specialty-contractor pay in the city's county moves that down by 7%, to 17% above the national mean. Materials in the area's ZIP codes price 3% above the national average. Together they give Brooklyn a construction cost index of 1.11.
Where Brooklyn sits in New York
Brooklyn is the 9th most expensive of the 13 New York cities in our index, against a statewide index of 1.10. New York is the dearest at 1.27; Rochester is the least expensive at 1.00.
Against the rest of the country
Of the 306 U.S. cities in JobFlex's index, Brooklyn ranks 75th from the most expensive. The job that averages $11,600 here averages $10,500 at the national rate.
Climate a system is sized for in New York
Contractors size equipment for the local design temperatures. Across New York's counties the median is about 87°F on a hot summer day and 0°F on a cold winter night (ENERGY STAR county table), and your county can differ. Winters that cold are where a cold-climate heat pump or a furnace earns its price.
Sales tax in New York
New York's base state sales tax is 4%, and cities and counties can add their own. How it applies to a home-improvement contract varies, so ask whether a quote includes it. Prices on this page are before tax.
What a Brooklyn contractor will ask before quoting
- Job type — new construction, replacement or upgrade — and the evidence for it
- Heating and cooling load for this house (not the old nameplate), tonnage, fuel and refrigerant
- Ducts, line set, circuit, gas line and flue: keep, fix or replace, each with its reason
- Water heater in scope, and whether it shared the old flue
- Panel main amps, free slots and the new equipment's MCA
- Permits, tests and incentives that apply in this state
HVAC replacement cost in other New York cities
A 3-ton system with central AC + gas furnace averages $11,600 in Brooklyn; $13,300 in Manhattan, $12,500 in Queens, $13,300 in New York.
| City | Average · range |
|---|---|
| Manhattan, NY14% more | $13,300$9,050 – $17,500 |
| Queens, NY8% more | $12,500$8,550 – $16,500 |
| New York, NY14% more | $13,300$9,050 – $17,500 |
| Bronx, NY5% more | $12,200$8,350 – $16,100 |
| Staten Island, NY5% more | $12,100$8,300 – $16,000 |
| Hempstead, NY6% more | $12,300$8,450 – $16,300 |
| Huntington, NY4% more | $12,000$8,200 – $15,800 |
| White Plains, NY5% more | $12,100$8,300 – $16,000 |
HVAC replacement price in Brooklyn: questions
How much does a new HVAC system cost in Brooklyn, NY?
About $11,600 for a 3-ton system with central AC + gas furnace, and most Brooklyn quotes fall between $7,950 and $15,300. That is 11% above the U.S. average, where the same job averages $10,500.
What is the HVAC price per ton in Brooklyn?
$2,646 to $5,104 per ton, about $3,875 on average with central AC + gas furnace. Smaller jobs cost more per unit, because the fixed costs are spread over less.
How much is a 4-ton system in Brooklyn?
$9,000 to $17,300, about $13,200 on average, with central AC + gas furnace — $3,291 per ton.
Do you need a permit for HVAC replacement in Brooklyn?
Yes — installing HVAC or fuel-burning equipment needs a permit nearly everywhere, Brooklyn included. The prices on this page carry $150–$400 for the permit and inspection.
Does the price include sales tax in New York?
No. The prices here are before tax; New York's base state rate is 4%, plus any local rate.
What size HVAC system does a house in Brooklyn need?
It is worked out with a Manual J load calculation for the house — included in the prices above — not from square footage alone. Here it is run against design temperatures of about 87°F in summer and 0°F in winter (the New York median).
Other home projects in Brooklyn
HVAC replacement cost in New York
- HVAC replacement cost in Manhattan, NY
- HVAC replacement cost in Queens, NY
- HVAC replacement cost in New York, NY
- HVAC replacement cost in Bronx, NY
- HVAC replacement cost in Staten Island, NY
- HVAC replacement cost in Hempstead, NY
- HVAC replacement cost in Huntington, NY
- HVAC replacement cost in White Plains, NY
How these prices are built
Every price on this page comes from JobFlex's contractor price book: what a homeowner pays a licensed contractor for each step of the job, as a U.S. national average per unit, with the contractor's overhead and profit included and sales tax left out. The HVAC replacement is priced step by step, then multiplied by Brooklyn's construction cost index of 1.11.
Where the price book's steps for an option add up to more than 20% over the installed price a published source gives for the whole job, every step but a permit fee is scaled down to the middle of that range: central AC + gas furnace × 0.76 (HomeCostCalcs 2026: $7,000–$14,000); heat pump + air handler × 0.76, following central AC + gas furnace; cold-climate heat pump + air handler × 0.76, following central AC + gas furnace.
The index weighs local construction wages (BLS Occupational Employment and Wage Statistics, May 2025) at 60% and the area's material prices (Craftsman ZIP-area factors) at 40%. Published indices for Brooklyn, each on its own base: HUD 1.37, Craftsman 1.04. Treat any city figure as about ±5%; a contractor's quote for your house is the number to plan with.
Contractors in Brooklyn build quotes like these with JobFlex's HVAC estimator.
- HomeCostCalcs 2026: furnace + AC replacement $7,000-$14,000 standard, $10,000-$20,000 high efficiency
- Today's Homeowner 2025: complete HVAC system install $5,000-$12,500