HVAC Replacement Cost in New York, NY (2026)
Updated October 2026 · New York, NY · index 1.27
How much does a new HVAC system cost in New York? For a 3-ton system with central AC + gas furnace, homeowners in New York, NY pay about $13,300 on average, and most quotes land between $9,050 and $17,500 — $3,020 to $5,820 per ton. The price covers removing the old system, the new outdoor and indoor equipment, a new line set, electrical and condensate connections, the thermostat, the permit, start-up and commissioning.
The HVAC replacement price in New York runs 27% above the U.S. average. The same job averages $10,500 nationally and about $11,500 at the New York statewide index.
HVAC Replacement cost calculator for New York
1.5 to 5 ton
Are you a HVAC contractor? Price jobs like this in 60 seconds
HVAC replacement price in New York by system type
What a 3-ton system costs in New York with each system type, installed:
| Option | Average · range |
|---|---|
| Central AC + gas furnacesplit AC, matched coil and an 80,000 BTU furnace$4,420 per ton | $13,300$9,050 – $17,500 |
| Heat pump + air handlerall-electric split heat pump, no furnace$4,098 per ton | $12,300$8,250 – $16,300 |
| Cold-climate heat pump + air handlervariable-speed heat pump rated for deep winter$4,685 per ton | $14,100$9,500 – $18,600 |
The least expensive option in New York is heat pump + air handler, at about $12,300; cold-climate heat pump + air handler averages $14,100, 1.1 times as much.
Cost to replace an HVAC system in New York by size
With central AC + gas furnace, priced for New York, NY:
| Size | Average · range |
|---|---|
| A 2-ton system$5,749 per ton | $11,500$7,850 – $15,100 |
| A 3-ton system$4,420 per ton | $13,300$9,050 – $17,500 |
| A 4-ton system$3,756 per ton | $15,000$10,300 – $19,800 |
Some costs stay the same whatever the size — load calculation and equipment sizing, mechanical permit and inspection, old system removed, refrigerant recovered — so a bigger job costs less per unit: $3,756 per ton for a 4-ton system against $5,749 for a 2-ton system.
What an HVAC replacement in New York includes
Line by line, the $13,300 average for a 3-ton system breaks down like this: 32% labor, 65% materials and equipment, and $270 in permit fees passed through at cost.
| Line | Low – high |
|---|---|
| Load calculation and equipment sizing | $100 – $290 |
| Mechanical permit and inspection | $150 – $400 |
| Old system removed, refrigerant recovered | $430 – $770 |
| Gas furnace (about 80,000 BTU) | $1,950 – $3,500 |
| Outdoor unit, set on a new pad | $2,900 – $5,400 |
| Matched indoor coil | $1,250 – $2,700 |
| New refrigerant line set (25 ft) | $480 – $770 |
| Disconnect, whip and thermostat wire | $270 – $430 |
| Condensate drain and safety switch | $140 – $340 |
| Gas connection and furnace venting | $410 – $750 |
| Plenums and transitions to the ducts | $340 – $770 |
| Programmable or smart thermostat | $290 – $530 |
| Evacuation and refrigerant charge | $140 – $290 |
| Start-up and commissioning | $140 – $340 |
| Warranty registration and walk-through | $70 – $170 |
Each line is the price book's U.S. rate for that step, scaled by 0.76 to the installed price published sources give for the whole job (see how these prices are built), times New York's index of 1.27; permit fees are not scaled.
Get free quotes from New York contractors
Describe your project once and JobFlex sends it to a local HVAC contractor who prices it for your home — free, no account needed.
What affects HVAC replacement prices in New York
Where New York sits in New York
New York ties for the most expensive of the 13 New York cities in our index, against a statewide index of 1.10. Rochester is the least expensive at 1.00.
Against the rest of the country
Of the 306 U.S. cities in JobFlex's index, New York ranks 4th from the most expensive. The job that averages $13,300 here averages $10,500 at the national rate.
Climate a system is sized for in New York
Contractors size equipment for the local design temperatures. Across New York's counties the median is about 87°F on a hot summer day and 0°F on a cold winter night (ENERGY STAR county table), and your county can differ. Winters that cold are where a cold-climate heat pump or a furnace earns its price.
Sales tax in New York
New York's base state sales tax is 4%, and cities and counties can add their own. How it applies to a home-improvement contract varies, so ask whether a quote includes it. Prices on this page are before tax.
What a New York contractor will ask before quoting
- Job type — new construction, replacement or upgrade — and the evidence for it
- Heating and cooling load for this house (not the old nameplate), tonnage, fuel and refrigerant
- Ducts, line set, circuit, gas line and flue: keep, fix or replace, each with its reason
- Water heater in scope, and whether it shared the old flue
- Panel main amps, free slots and the new equipment's MCA
- Permits, tests and incentives that apply in this state
HVAC replacement cost in other New York cities
A 3-ton system with central AC + gas furnace averages $13,300 in New York; $13,300 in Manhattan, $11,600 in Brooklyn, $12,500 in Queens.
| City | Average · range |
|---|---|
| Manhattan, NYsame as New York | $13,300$9,050 – $17,500 |
| Brooklyn, NY13% less | $11,600$7,950 – $15,300 |
| Queens, NY6% less | $12,500$8,550 – $16,500 |
| Bronx, NY8% less | $12,200$8,350 – $16,100 |
| Staten Island, NY9% less | $12,100$8,300 – $16,000 |
| Hempstead, NY7% less | $12,300$8,450 – $16,300 |
| Huntington, NY9% less | $12,000$8,200 – $15,800 |
| White Plains, NY9% less | $12,100$8,300 – $16,000 |
HVAC replacement price in New York: questions
How much does a new HVAC system cost in New York, NY?
About $13,300 for a 3-ton system with central AC + gas furnace, and most New York quotes fall between $9,050 and $17,500. That is 27% above the U.S. average, where the same job averages $10,500.
What is the HVAC price per ton in New York?
$3,020 to $5,820 per ton, about $4,420 on average with central AC + gas furnace. Smaller jobs cost more per unit, because the fixed costs are spread over less.
How much is a 4-ton system in New York?
$10,300 to $19,800, about $15,000 on average, with central AC + gas furnace — $3,756 per ton.
Do you need a permit for HVAC replacement in New York?
Yes — installing HVAC or fuel-burning equipment needs a permit nearly everywhere, New York included. The prices on this page carry $150–$400 for the permit and inspection.
Does the price include sales tax in New York?
No. The prices here are before tax; New York's base state rate is 4%, plus any local rate.
What size HVAC system does a house in New York need?
It is worked out with a Manual J load calculation for the house — included in the prices above — not from square footage alone. Here it is run against design temperatures of about 87°F in summer and 0°F in winter (the New York median).
Other home projects in New York
HVAC replacement cost in New York
- HVAC replacement cost in Manhattan, NY
- HVAC replacement cost in Brooklyn, NY
- HVAC replacement cost in Queens, NY
- HVAC replacement cost in Bronx, NY
- HVAC replacement cost in Staten Island, NY
- HVAC replacement cost in Hempstead, NY
- HVAC replacement cost in Huntington, NY
- HVAC replacement cost in White Plains, NY
How these prices are built
Every price on this page comes from JobFlex's contractor price book: what a homeowner pays a licensed contractor for each step of the job, as a U.S. national average per unit, with the contractor's overhead and profit included and sales tax left out. The HVAC replacement is priced step by step, then multiplied by New York's construction cost index of 1.27.
Where the price book's steps for an option add up to more than 20% over the installed price a published source gives for the whole job, every step but a permit fee is scaled down to the middle of that range: central AC + gas furnace × 0.76 (HomeCostCalcs 2026: $7,000–$14,000); heat pump + air handler × 0.76, following central AC + gas furnace; cold-climate heat pump + air handler × 0.76, following central AC + gas furnace.
The index weighs local construction wages (BLS Occupational Employment and Wage Statistics, May 2025) at 60% and the area's material prices (Craftsman ZIP-area factors) at 40%. Treat any city figure as about ±5%; a contractor's quote for your house is the number to plan with.
Contractors in New York build quotes like these with JobFlex's HVAC estimator.
- HomeCostCalcs 2026: furnace + AC replacement $7,000-$14,000 standard, $10,000-$20,000 high efficiency
- Today's Homeowner 2025: complete HVAC system install $5,000-$12,500