HVAC Replacement Cost in Lynnwood, WA (2026)
Updated October 2026 · Lynnwood, WA · index 1.21
How much does a new HVAC system cost in Lynnwood? For a 3-ton system with central AC + gas furnace, homeowners in Lynnwood, WA pay about $12,600 on average, and most quotes land between $8,650 and $16,700 — $2,880 to $5,552 per ton. The price covers removing the old system, the new outdoor and indoor equipment, a new line set, electrical and condensate connections, the thermostat, the permit, start-up and commissioning.
The HVAC replacement price in Lynnwood runs 21% above the U.S. average: construction labor in the Lynnwood area runs 33% above the national mean, materials 3% above. The same job averages $10,500 nationally and about $12,100 at the Washington statewide index.
HVAC Replacement cost calculator for Lynnwood
1.5 to 5 ton
Are you a HVAC contractor? Price jobs like this in 60 seconds
HVAC replacement price in Lynnwood by system type
What a 3-ton system costs in Lynnwood with each system type, installed:
| Option | Average · range |
|---|---|
| Central AC + gas furnacesplit AC, matched coil and an 80,000 BTU furnace$4,216 per ton | $12,600$8,650 – $16,700 |
| Heat pump + air handlerall-electric split heat pump, no furnace$3,909 per ton | $11,700$7,900 – $15,600 |
| Cold-climate heat pump + air handlervariable-speed heat pump rated for deep winter$4,468 per ton | $13,400$9,050 – $17,800 |
The least expensive option in Lynnwood is heat pump + air handler, at about $11,700; cold-climate heat pump + air handler averages $13,400, 1.1 times as much.
Cost to replace an HVAC system in Lynnwood by size
With central AC + gas furnace, priced for Lynnwood, WA:
| Size | Average · range |
|---|---|
| A 2-ton system$5,484 per ton | $11,000$7,500 – $14,400 |
| A 3-ton system$4,216 per ton | $12,600$8,650 – $16,700 |
| A 4-ton system$3,582 per ton | $14,300$9,800 – $18,900 |
Some costs stay the same whatever the size — load calculation and equipment sizing, mechanical permit and inspection, old system removed, refrigerant recovered — so a bigger job costs less per unit: $3,582 per ton for a 4-ton system against $5,484 for a 2-ton system.
What an HVAC replacement in Lynnwood includes
Line by line, the $12,600 average for a 3-ton system breaks down like this: 32% labor, 65% materials and equipment, and $280 in permit fees passed through at cost.
| Line | Low – high |
|---|---|
| Load calculation and equipment sizing | $90 – $280 |
| Mechanical permit and inspection | $150 – $400 |
| Old system removed, refrigerant recovered | $410 – $740 |
| Gas furnace (about 80,000 BTU) | $1,850 – $3,300 |
| Outdoor unit, set on a new pad | $2,750 – $5,150 |
| Matched indoor coil | $1,200 – $2,600 |
| New refrigerant line set (25 ft) | $460 – $740 |
| Disconnect, whip and thermostat wire | $250 – $410 |
| Condensate drain and safety switch | $140 – $320 |
| Gas connection and furnace venting | $390 – $720 |
| Plenums and transitions to the ducts | $320 – $740 |
| Programmable or smart thermostat | $280 – $510 |
| Evacuation and refrigerant charge | $140 – $280 |
| Start-up and commissioning | $140 – $320 |
| Warranty registration and walk-through | $70 – $160 |
Each line is the price book's U.S. rate for that step, scaled by 0.76 to the installed price published sources give for the whole job (see how these prices are built), times Lynnwood's index of 1.21; permit fees are not scaled.
Get free quotes from Lynnwood contractors
Describe your project once and JobFlex sends it to a local HVAC contractor who prices it for your home — free, no account needed.
What affects HVAC replacement prices in Lynnwood
Labor and materials in Lynnwood
Construction wages in the Lynnwood metro run 34% above the U.S. mean (BLS, May 2025), and specialty-contractor pay in the city's county moves that down by 1%, to 33% above the national mean. Materials in the area's ZIP codes price 3% above the national average. Together they give Lynnwood a construction cost index of 1.21.
Where Lynnwood sits in Washington
Lynnwood is the 14th most expensive of the 32 Washington cities in our index, against a statewide index of 1.16. Seattle is the dearest at 1.25; Yakima is the least expensive at 1.04.
Against the rest of the country
Of the 306 U.S. cities in JobFlex's index, Lynnwood ranks 28th from the most expensive. The job that averages $12,600 here averages $10,500 at the national rate.
Climate a system is sized for in Washington
Contractors size equipment for the local design temperatures. Across Washington's counties the median is about 89°F on a hot summer day and 16°F on a cold winter night (ENERGY STAR county table), and your county can differ. A standard heat pump handles most winters here; a furnace or a cold-climate model covers the coldest nights.
Sales tax in Washington
Washington's base state sales tax is 6.5%, and cities and counties can add their own. How it applies to a home-improvement contract varies, so ask whether a quote includes it. Prices on this page are before tax.
What a Lynnwood contractor will ask before quoting
- Job type — new construction, replacement or upgrade — and the evidence for it
- Heating and cooling load for this house (not the old nameplate), tonnage, fuel and refrigerant
- Ducts, line set, circuit, gas line and flue: keep, fix or replace, each with its reason
- Water heater in scope, and whether it shared the old flue
- Panel main amps, free slots and the new equipment's MCA
- Permits, tests and incentives that apply in this state
HVAC replacement cost in other Washington cities
A 3-ton system with central AC + gas furnace averages $12,600 in Lynnwood; $13,100 in Shoreline, $12,600 in Edmonds, $13,100 in Mercer Island.
| City | Average · range |
|---|---|
| Shoreline, WA3% more | $13,100$8,900 – $17,200 |
| Edmonds, WAsame as Lynnwood | $12,600$8,650 – $16,700 |
| Mercer Island, WA3% more | $13,100$8,900 – $17,200 |
| Mill Creek, WAsame as Lynnwood | $12,600$8,650 – $16,700 |
| Sammamish, WA3% more | $13,100$8,900 – $17,200 |
| Everett, WA4% less | $12,100$8,300 – $16,000 |
| Issaquah, WA3% more | $13,100$8,900 – $17,200 |
| Marysville, WA4% less | $12,100$8,300 – $16,000 |
HVAC replacement price in Lynnwood: questions
How much does a new HVAC system cost in Lynnwood, WA?
About $12,600 for a 3-ton system with central AC + gas furnace, and most Lynnwood quotes fall between $8,650 and $16,700. That is 21% above the U.S. average, where the same job averages $10,500.
What is the HVAC price per ton in Lynnwood?
$2,880 to $5,552 per ton, about $4,216 on average with central AC + gas furnace. Smaller jobs cost more per unit, because the fixed costs are spread over less.
How much is a 4-ton system in Lynnwood?
$9,800 to $18,900, about $14,300 on average, with central AC + gas furnace — $3,582 per ton.
Do you need a permit for HVAC replacement in Lynnwood?
Yes — installing HVAC or fuel-burning equipment needs a permit nearly everywhere, Lynnwood included. The prices on this page carry $150–$400 for the permit and inspection.
Does the price include sales tax in Washington?
No. The prices here are before tax; Washington's base state rate is 6.5%, plus any local rate.
What size HVAC system does a house in Lynnwood need?
It is worked out with a Manual J load calculation for the house — included in the prices above — not from square footage alone. Here it is run against design temperatures of about 89°F in summer and 16°F in winter (the Washington median).
Other home projects in Lynnwood
HVAC replacement cost in Washington
- HVAC replacement cost in Shoreline, WA
- HVAC replacement cost in Edmonds, WA
- HVAC replacement cost in Mercer Island, WA
- HVAC replacement cost in Mill Creek, WA
- HVAC replacement cost in Sammamish, WA
- HVAC replacement cost in Everett, WA
- HVAC replacement cost in Issaquah, WA
- HVAC replacement cost in Marysville, WA
How these prices are built
Every price on this page comes from JobFlex's contractor price book: what a homeowner pays a licensed contractor for each step of the job, as a U.S. national average per unit, with the contractor's overhead and profit included and sales tax left out. The HVAC replacement is priced step by step, then multiplied by Lynnwood's construction cost index of 1.21.
Where the price book's steps for an option add up to more than 20% over the installed price a published source gives for the whole job, every step but a permit fee is scaled down to the middle of that range: central AC + gas furnace × 0.76 (HomeCostCalcs 2026: $7,000–$14,000); heat pump + air handler × 0.76, following central AC + gas furnace; cold-climate heat pump + air handler × 0.76, following central AC + gas furnace.
The index weighs local construction wages (BLS Occupational Employment and Wage Statistics, May 2025) at 60% and the area's material prices (Craftsman ZIP-area factors) at 40%. Published indices for Lynnwood, each on its own base: Craftsman 1.13. Treat any city figure as about ±5%; a contractor's quote for your house is the number to plan with.
Contractors in Lynnwood build quotes like these with JobFlex's HVAC estimator.
- HomeCostCalcs 2026: furnace + AC replacement $7,000-$14,000 standard, $10,000-$20,000 high efficiency
- Today's Homeowner 2025: complete HVAC system install $5,000-$12,500
